NUVAIR – Pro CO Panel Mount Analyzer (Carbon Monoxide) 9624 – With Hi/Low alarm
The Nuvair Pro CO Alarm panel mount analyzer is designed for installation on a control panel or other flat surface for flush mounting. The analyzer connects in-line to high or low pressure compressors for continuous monitoring of carbon monoxide contaminants in the system. Equipped with audible and visual alarms.
Designed for installation on a compressor control panel or other flat surface, the Nuvair Pro CO Alarm panel mount analyzer measures carbon monoxide levels in breathing gas mixtures or air.
Audible and visual alarms for low and high carbon monoxide content can be set by the user. If the alarm sounds, the analog output can activate an optional relay that shuts down compressors automatically, sounds a remote alarm, or activates an emergency backup system.
PLEASE NOTE: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Inaccurate gas analysis can lead to serious personal injury or death. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required.
|Flow Rate||0.5-1 L/min|
|Expected Sensor Life||>24 months in normal use from date of manufacture|
|Range||0-50 ppm CO|
|Alarms||Two user-programmable audible and visual alarms|
|Response Time||<50 seconds over complete temperature range|
|Operating Temperature||14° to 122°F (-10° to 50°C) continuous
-4° to 122°F (-20° to 50°C) intermittent
|Operating Humidity||Non-condensing: 15-90% continuous; 0-99% intermittent|
|Storage Temperature||14° to 140°F (-10° to 60°C)|
|Power||• 9 Volt Battery (SKU 9624-B)
• Rechargeable Lithium Battery (SKU 9624-LB)
• Wall Plug-in [International] (SKU 9624-E)
(L x W x H)
|4 x 2 x 5.5 in
(10.2 x 5 x 14 cm)
|Weight||9 oz (0.3 kg)|
|Replacement Sensor||SKU 9501|