Stanley Tools – TP08 Heavy Duty Hydraulic Underwater Trash Pump (Excludes Hose Whips – Includes Couplers)
The Stanley TP08 Trash Pump is a lightweight, heavy duty pump capable of pumping high volumes of water, sand slurries, gravel, sludge and solids up to 3in./75 mm in diameter. The TP08 is submersible, self priming and can run dry without damage to the motor, bearings or impeller.
|Capacity||800 gpm||3,028 lpm|
|Weight||59 Lbs||26.7 kg|
|Height (over handle)||16.5 in.||42 cm|
|Length||19 in.||48.3 cm|
|Width||15 in.||38.1 cm|
|Pressure||2,000 psi||140 bar|
|Flow Range||7-9 gpm||26-34 lpm|
|Maximum Flow||9 gpm||34 lpm|
|Porting||#10 SAE (Press.) #12 SAE (Ret)|
|Connect Size and Type||½ in. Male Pipe (Press.) ¾ in. Male Pipe (Ret)|
|Discharge Diameter||4 in. Camlock|
|Inlet Diameter||4 in.||100 mm|
The TP08 has been designed to get the most from an HTMA Type II hydraulic circuit. Using only 9 gpm/34 lpm of hydraulic flow, the TP08 will pump over 800 gpm/3,028 lpm at a 10 ft/2.54 m head. The free-flow impeller and 4 in./ 100 mm inlet and outlet combine to make the TP08 one of the most efficient pumps in the business.
Weighing only 59 lbs/27 kg and with its convenient handle, theTP08 can easily be handled by one operator. The TP08 and the Stanley HP28 Power Unit make a powerful, portable team for high volume de-watering and trash pump applications.
The heavy-duty construction of the TP08 features a fabricated, all steel volute and abrasion resistant cast iron impeller. The volute uses replaceable UHMW polyeth-ylene wear plates to reduce wear and extend pump life. The heavy-duty Stanley HYREVZ™ hydraulic motor is self-lubricating.