Hycon – HWP4 4″ Trash Pump (110136)
- 4″ Output
- 30′ Discharge hose included with quick connects (Pump end only)
- Max Head 65′ Feet / 20 Meters
- 750 GPM
- No electric cables
- Run dry without damage
- Very high performance
- Few wearing parts – less service
- Long life
- VORTEX design – cost-saving
- Hydraulic Oil Flow 8-10 GPM / 30 – 40 LPM
- Max Hydraulic Pressure 2500 PSI / 172 BAR
- BSP British Standard Pipe Thread (Non-Tapered)
- 9932437
Regular flushing with fresh water is key to maintaining any pump used in saltwater. Most Pump manufacturers recommend a freshwater flush after every use in saltwater.
HYCON Submersible pumps High quality and performance. Run dry without damage..!
The HYCON submersible pump is a VORTEX pump. VORTEX pumps are designed especially for dirty water with even very large solids. The impeller at top sets the water in a circular movement and by centrifugal force a center of air shaped like a cone will occur. This way there is very little contact between the water and the impeller, and wear is greatly reduced compared to other types of pumps. In other types of pumps, the water is pumped directly by the impeller, which is therefore worn much faster. Pumps of the special VORTEX design have a longer lifetime and can pump larger solids.
| Discount Category | Trash/water Pumps |
|---|---|
| SKU | HWP4 |
| Manufacture | Hycon™ |
| Select Model | 4″ HWP Trash Pump |
| Select Model | Hycon HWP4 Pump |
| Oil Flow Required | 8-10 GPM 30/40 LPM |
| Working Pressure | 1,750 – 2,175 PSI |
| Max return pressure | 580 PSI / 40 BAR |
| Max. Lift head | 65 Feet / 20 Meters |
| Max. Pressure | 2,500 PSI / 172 BAR |
| UPC BARCODE | No |
| Unboxed Weight | 59 |
| Shipping Weight | 65.0 |
| Made In | Denmark |
