Oxygen Sensor for Pro O2 Analyzer | 9505
The Nuvair 9505 replacement oxygen sensor is for use with the Nuvair Pro O2 Analyzer.
The Nuvair 9505 is a replacement electrochemical oxygen sensor for gas analyzers. This sensor threads onto the analyzer’s front face for increased moisture resistance. Under normal use, oxygen sensors have an expected service life of 36 months. The 9505 replacement sensor fits the following analyzers:
- Nuvair Pro O2 Analyzer
PLEASE NOTE: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Inaccurate gas analysis can lead to serious personal injury or death. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required.
Specifications
| Output | 25±2 mV in air at 25°C/77°F, sea level |
|---|---|
| Electrical Connector | Mating plug: Molex (PN 22-28-0021 or 22-28-3021 or 22-23-5024) |
| Range | 0-100% Oxygen |
| Accuracy | ± 1% of full scale at constant temperature and pressure (0-1 atm) when calibrated with 100% oxygen |
| Sensor Type | Electrochemical |
| Expected Sensor Life | 36 months in air at 77°F (25°C) and 50% rh |
| Response Time | <6 seconds for 90% of final value |
| Operating Temperature | 32-104°F (0-40°C) |
| Storage Temperature | 32-122°F (0-50°C) |
| Humidity | 0-99% rh (non-condensing) |
| Weight | 1 oz (28.3 g) |
| Application | For diving cylinder oxygen verification and other forms of oxygen testing on the surface/above water. Not intended for underwater use. |
