NUVAIR – Replacement Sensor Oxygen O2 – 9510
The Nuvair 9510 replacement oxygen sensor is for use with the following gas analyzers: Nuvair O2 Quickstick, OMS 2, UBS O2 Stick, and Nuvair Pro Trimix. For use in Pro Trimix analyzers sold before 04/2013.
The 9510 is a replacement electrochemical oxygen sensor for gas analyzers. Under normal use, oxygen sensors have an expected service life of 36 months. The 9510 replacement sensor fits the following analyzers:
- Nuvair O2 Quickstick™
- OMS O2
- UBS O2 Stick
- Nuvair Pro Trimix sold before 04/2013
PLEASE NOTE: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Inaccurate gas analysis can lead to serious personal injury or death. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required.
Specifications
| Output | 25±2 mV in air at 25°C/77°F, sea level |
|---|---|
| Electrical Connector | Mating plug: Molex (PN 22-28-0021 or 22-28-3021 or 22-23-5024) |
| Range | 0-100% Oxygen |
| Accuracy | +/-1% of full scale at constant temperature and pressure (0-1 atm) when calibrated with 100% oxygen |
| Sensor Type | Electrochemical |
| Expected Sensor Life | 36 months in air at 25°C/77°F and 50% rh |
| Response Time | <6 seconds for 90% of final value |
| Operating Temperature | 32-104°F (0-40°C) |
| Storage Temperature | 32-122°F (0-50°C) |
| Humidity | 0-99% rh (non-condensing) |
| Weight | 1 oz (28.3 g) |
| Application | For diving cylinder oxygen verification and other forms of oxygen testing on the surface/above water. Not intended for underwater use. |
