Stanley Tools – TP08 Heavy Duty Hydraulic Underwater Trash Pump (Excludes Hose Whips – Includes Couplers)
The Stanley TP08 Trash Pump is a lightweight, heavy duty pump capable of pumping high volumes of water, sand slurries, gravel, sludge and solids up to 3in./75 mm in diameter. The TP08 is submersible, self priming and can run dry without damage to the motor, bearings or impeller.
| SPECIFICATIONS | ||
| ITEM | U.S.A. | METRIC |
| Capacity | 800 gpm | 3,028 lpm |
| Weight | 59 Lbs | 26.7 kg |
| Height (over handle) | 16.5 in. | 42 cm |
| Length | 19 in. | 48.3 cm |
| Width | 15 in. | 38.1 cm |
| Pressure | 2,000 psi | 140 bar |
| Flow Range | 7-9 gpm | 26-34 lpm |
| Maximum Flow | 9 gpm | 34 lpm |
| Porting | #10 SAE (Press.) #12 SAE (Ret) | |
| Connect Size and Type | ½ in. Male Pipe (Press.) ¾ in. Male Pipe (Ret) | |
| Discharge Diameter | 4 in. Camlock | |
| Inlet Diameter | 4 in. | 100 mm |
The TP08 has been designed to get the most from an HTMA Type II hydraulic circuit. Using only 9 gpm/34 lpm of hydraulic flow, the TP08 will pump over 800 gpm/3,028 lpm at a 10 ft/2.54 m head. The free-flow impeller and 4 in./ 100 mm inlet and outlet combine to make the TP08 one of the most efficient pumps in the business.
Weighing only 59 lbs/27 kg and with its convenient handle, theTP08 can easily be handled by one operator. The TP08 and the Stanley HP28 Power Unit make a powerful, portable team for high volume de-watering and trash pump applications.
The heavy-duty construction of the TP08 features a fabricated, all steel volute and abrasion resistant cast iron impeller. The volute uses replaceable UHMW polyeth-ylene wear plates to reduce wear and extend pump life. The heavy-duty Stanley HYREVZ™ hydraulic motor is self-lubricating.
