NUVAIR – Pro O2 Alarm Analyzer – Handheld
The handheld Nuvair Pro O2 Alarm Analyzer is easy to operate and rugged. Users can set two audible/visible alarms for high and low oxygen percentages. When the alarm sounds, the analog output can activate an optional relay that automatically shuts down compressors, sounds an alarm, or activates a back-up system.
Easy to operate, extremely accurate and stable, the handheld Nuvair Pro O2 Alarm Analyzer is preferred by commercial, military, technical and advanced recreational divers using nitrox and non-divers who require a simple oxygen analysis of compressed gas or contained spaces. Audible and visual alarms for low and high oxygen content can be set by the user. If the alarm sounds, the analog output can activate an optional relay that shuts down compressors automatically, sounds a remote alarm, or activates an emergency backup system. Price varies according to power options.
Our water- and impact-resistant case is designed for everyday use in the marine environment. To change the battery or sensor, simply remove four screws to access user-changeable components. All Nuvair Pro O2 units are built and tested in-house, and are ready to use upon receipt.
PLEASE NOTE: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Inaccurate gas analysis can lead to serious personal injury or death. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required.
Features
- On/Off switch
- Low battery warning indicator
- Easy calibration
- User-replaceable battery and sensor
- Audible alarm sounds when user-defined low or high O2 percentage is reached
- 4-20 mA analog output for external devices
- Analog output can activate optional relay to automatically shutdown compressor when alarm activates
- Fast response, thermally compensated sensor
- Completely sealed, water resistant housing
- Automatic calibration
- Specifically designed to test breathing gases
Replacement Sensor
- Oxygen Sensor Replacement 9506
Specifications
| Display Accuracy | ±1% |
|---|---|
| Sensor Type | electrochemical |
| Expected Cell Life | 36 month in air at 25°C (77°F) and 50% rh |
| Range | 0-100% oxygen |
| Response Time | <6 seconds for 90% of final value |
| Operating Temperature | 32-104°F (0-40°C) |
| Storage Temperature | 32-122°F (0-50°C) |
| Operating Humidity | up to 100% rh |
| Power | 9-volt battery or rechargeable lithium battery |
| Dimensions (L x W x H) |
4-1/8 x 2-1/2 x 1-3/4 in (10.5 x 6.2 x 4.4 cm) |
