Thank you for your continued support this year. Please note that we’ll be short-staffed during the holiday season, but we’ll do our best to respond to emails as quickly as possible. Our office will be closed from December 23 to January 3, resuming normal operations on January 6. Wishing you a joyful holiday season and a prosperous New Year!

SUBSALVE – VEHICULE RECOVERY SYSTEM

USD $2,781.60USD $3,925.60

SKU: N/A Categories: , Tag:

SUBSALVE – VEHICULE RECOVERY SYSTEM

SUBSALVE – VEHICULE RECOVERY SYSTEM

The SUBSALVE USA VRS-2000 and VRS-4000 are the only self-contained patented systems
available today. We have been refining every aspect of the system for over twenty years,
incorporating input from the commercial and public safety diving communities as well
as experience with actual recoveries. This all-purpose system is portable for rapid
deployment. Equipped with all necessary hardware – ready for immediate use.

Fabric

· Urethane-coated nylon—high-strength and heavy-duty
· Superior abrasion resistance
· Resistant to most petro-chemicals
· UV-resistant
· Low maintenance requirements and easy to clean
· RF welded seams
Used by 250 domestic and fifty worldwide public safety dive teams
VRS-2000 for automobiles and other small vehicles
VRS-4000 for trucks, buses and larger vehicles
VRS-4000-HELO emergency flotation to prevent sinking if an aircraft is ditched
(NATO approved)

System Components

VRS-2000 & VRS-4000
· Two 2000lb or two 4000lb enclosed flotation bags each with a pocket for an 80ft3
aluminum SCUBA cylinder.
· The air cylinder connects to the lift bag with a SCUBA yoke and hose assembly with a
one way check valve for easy tank changes while preventing any loss of air from the bag.
· Two stainless steel lift rings on top and two on the bottom of bag that allow the lift bag
to be rigged either flat or upright.
· (2) Bottom lift rings are each equipped with a 3′ length of ¼” galvanized proof coil
chain and a stainless steel snap carabiner on the end.
VRS-4000-HELO
· For rapid deployment to prevent aircraft from sinking if ditched
· One 4000lb enclosed flotation bag with a pocket for an 80ft3 aluminum scuba cylinder, a
single pick point with stainless steel snap hook, and flaps to enclose the entire system.
· The air cylinder connects to the lift bag with a SCUBA yoke and hose assembly with a
one way check valve for easy tank changes while preventing any loss of air from the bag.
· NATO approved

 

Model Lift Capacity Width Height Pack. Cubic Dim. Weight
(lb) (in) (in) (in x in x in) (lb)
(kg) (m) (m) (m x m x m) (kg)
VRS-2000 4400 55 60 24 x 24 x 20 60
2000 1.41 1.54 .61 x .61 x .51 27
VSR-4000 8800 69 75 24 x 24 x 30 100
4000 1.77 1.92 .61 x .61 x .76 45
VSR-4000-HELO 4400 69 75 24 x 24 x 18 55
2000 1.77 1.92 .61 x .61 x .46 25

 

TWO STATION MANIFOLD & HOSE (VSR-MN) IS AVAILABLE TOO.

Each SUBSALVE USA lift bag is tested prior to shipping. Custom sizes are available. All Subsalve USA products are compliant with IMCA D-016-AIRBAGS, ABS, U.S. Department of Defense Standards.

Weight 10 lbs
Dimensions 12 × 12 × 12 in
Lift Capacity

4400 LBS, 8800 LBS, 8800 LBS-HELO

You may also like…

Shopping cart0
There are no products in the cart!
Continue shopping
0
Scroll to Top